Table of Contents
Advertisement
Installation
REMOVING DOME
1.
Use the supplied torx key to unscrew the three fastening points for the dome.
2.
Lift the dome to remove it from the camera chassis.
INSTALLING THE MICROSD CARD
Steps:
1. Use the supplied hardware to unfasten the dome screws and remove the from the chassis.
2. Insert the microSD card into the available reader slot.
12000 Pecos St., Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
S-Series Camera Quick Start Guide | VX-4V-ID-RIAWD
4
Advertisement
Table of Contents
