Table of Contents
Advertisement
INSTALLING THE CAMERA — CABLING ROUTED THROUGH SIDE
Steps:
1.
Use a pencil and the mounting base to mark the drilling points on the installation surface.
2.
Drill the anchoring points into the installation surface.
3.
Insert the anchors.
4.
Use a screwdriver to fasten the mounting base to the installation surface.
5.
Proceed to Installation – Cabling and Safety Wire for next steps.
12000 Pecos St., Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
S-Series Camera Quick Start Guide | VX-4V-ID-RIAWD
5.0
6
Advertisement
Table of Contents
