When you want to output images from equipment connected to the Computer port or the BNC port
Connect the D-Sub port on the external monitor to the Monitor Out port on the projector.
B
When you want to output images from equipment connected to the 3G/HD/SD SDI port
Connect the SDI OUT port on the external monitor to the Monitor Out SDI port on the projector.
a
• Make the following settings to output image even when the projector is in standby mode.
• Set A/V Output to Always On.
Extended - A/V Settings - A/V Output
s
• Set Standby Mode to Communication On.
Extended - Standby Mode
s
• The Monitor Out port to which external monitors are connected can output analog RGB signals that are being input to the Computer port or the BNC port You