Connecting To An External Computer Monitor - Epson PowerLite EBL630U User Manual

Related references
Input Signal Settings - Signal I/O Menu

Connecting to an External Computer Monitor

If you connected a computer to the projector's Computer port, you can also connect an external monitor
to the projector. This lets you see your presentation on the external monitor even when the projected
image is not visible.
If you want to output images to an external monitor when the projector is turned off, you need to select
Always On as the A/V Output setting in the projector's Signal I/O menu.
Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.
1. Make sure your computer is connected to the projector's Computer1 port. If there are two computer
ports, make sure you use the Computer1 port.
2. Connect the external monitor's cable to your projector's Monitor Out port.
Note: You can only output analog RGB signals from the Computer1 port to an external monitor. You
cannot output signals from other ports.
Parent topic:
Related references
Feature Settings - Operation Menu
Projector Connections
55