Table of Contents
Advertisement
Part Names and Functions
Name
• Adjust the lens shift.
J
[
][
][ ][ ]
s "Adjusting the Position of the Projected Image
buttons
(Lens Shift)"
• When the Configuration menu or the Help screen is
displayed, pressing these buttons selects menu items
and setting values.
s "Using the Configuration Menu"
• When using the optional wireless mouse receiver,
pressing these buttons moves the pointer.
s "Optional Accessories"
• When the Configuration menu or the Help screen is
K
[
] button
displayed, it accepts and enters the current selection and
moves to the next level.
s "Using the Configuration Menu"
• Acts as a mouse's left button when using the optional
wireless mouse receiver.
s "Optional Accessories"
L
Shows or hides the Configuration.
[On-Screen] button
M
[Zoom] button
Press to adjust the zoom.
s "Adjusting the Image Size"
N
[Focus] button
Press to adjust the focus.
s "Correcting the Focus"
O
Press to adjust the lens shift.
[Lens Shift] button
s "Adjusting the Position of the Projected Image (Lens
Shift)"
If pressed for more than five seconds, the lens position
moves to the home position.
• Enter the Password.
P
Numeric buttons
s "Setting Password Protection"
• Use this button to enter numbers in Network settings
from the Configuration menu.
Function
p.31
p.116
p.205
p.116
p.205
p.33
p.34
p.31
p.109
Name
Q
[ID] button
Hold down this button and press the numeric buttons to
select the ID for the projector you want to operate using
the remote control.
s "ID Settings"
R
[ID] switch
Use this switch to enable (On)/disable (Off) ID settings for
the remote control.
s "ID Settings"
S
Connects the optional remote control cable set and
Remote port
outputs signals from the remote control.
s "Optional Accessories"
When the remote control cable is plugged into this remote
port, the remote control light-emitting is disabled.
T
Displays the Info menu from the Configuration menu.
[ ] button
s "Info Menu (Display Only)"
U
[Num] button
Hold down this button and press the numeric buttons to
enter passwords and numbers.
s "Setting Password Protection"
• Moves to the previous or next image file when
V
[[][]] buttons
projecting images from a computer connected via a
network.
• When using the optional wireless mouse receiver, you
can change the PowerPoint file page during projection
by pressing the page up/page down buttons.
W
Corrects distortion in the projected image.
[Geometry] button
s "Correcting Distortion in the Projected Image"
p.55
X
Displays a test pattern.
[Test Pattern] button
s "Displaying a Test Pattern"
Y
Press to correct distortion.
[Distortion] button
s "Correcting Distortion (Image Warping)"
Z
[Shutter] button
Press to turn the image on or off temporarily.
s "Hiding the Image Temporarily (Shutter)"
20
Function
p.37
p.37
p.205
p.136
p.109
p.29
p.34
p.100
Advertisement
Table of Contents
