Table of Contents
Advertisement
List of Functions
Basic menu
Submenu
Projector Name
The projector's name is displayed when using the supplied
application EasyMP Multi PC Projection.
When editing, you can enter up to 16 single-byte alphanumeric
characters. (" * + , / : ; < = > ? [ \ ] ` | and spaces cannot be used.)
PJLink Password
Set a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
(Spaces and symbols other than @ cannot be used.)
s "About PJLink"
Set a password to use Remote in Epson Web Control. You can
Remote Pass-
enter up to 8 single-byte alphanumeric characters. (* : and spaces
word
cannot be used.) The default user name is "EPSONREMOTE"
and the default password is "guest".
s "Changing Settings Using a Web Browser (Epson Web
Control)"
p.188
Function
p.195
Submenu
Web Control
Set a password for authentication to use when making settings
Password
and controlling the projector using Web Control in Epson Web
Control. You can enter up to eight single-byte alphanumeric
characters (* : and spaces cannot be used). The default user name
is "EPSONWEB" and the default password is "admin".
s "Changing Settings Using a Web Browser (Epson Web
Control)"
p.188
When set to On, you have to enter the keyword when you try to
Projector Key-
connect the projector to a computer via a network. As a result,
word
you can prevent presentations from being interrupted by
connections from other computers.
Normally this should be set to On.
EasyMP Multi PC Projection Operation Guide
s
Set the display format for the projector's network information. If
Display LAN Info.
you display the QR code, you can connect to a network just by
reading the QR code in Epson iProjection. Text & QR Code is set
by default.
Wireless LAN menu
To connect the projector to a computer using a wireless LAN, install the
Wireless LAN unit (ELPAP10).
131
Function
Advertisement
Table of Contents
