H/V-Keystone - Epson EB-L25000unl User Manual

Adjusting Projected Images
a
• By pressing the [Geometry] button on the remote control or the
control panel, you can perform the selected adjustment method
directly.
• When you want to re-adjust the projection position and so on, if
you want to release the correction status temporarily, set the
Geometry Correction to Off. Even when it is set to Off, the
correction values are saved.
s Settings - Geometry Correction
• You can save the geometry correction settings using Memory in
Geometry Correction, and load them when needed.
s "Memory Function"

H/V-Keystone

This allows you to correct distortion in the horizontal and vertical
directions independently.
Use the following to check the adjustment range for the image.
"H/V-Keystone" p.212
s
a
Press the [Menu] button while projecting.
b
Select Geometry Correction from Settings.
c
Select H/V-Keystone, and then press the [
p.123
p.103
] button.
"If this setting is changed, the image may be distorted." is displayed,
press the [ ] button.
d
Use the [ ][ ] buttons to select the correction method, and
then use the [ ][ ] buttons to make the corrections.
56