Control Panel - Epson EB-L25000unl User Manual

Part Names and Functions
Name
F
Remote port Connects the optional remote control cable set and inputs
signals from the remote control. When the remote control
cable is plugged into the Remote port, the remote receiver
on the projector is disabled.
s "Optional Accessories"
G
3G/HD/SD SDI port Inputs SDI signals from video equipment.
H
Monitor Out SDI port Connects to an external monitor, and outputs SDI signals
from video equipment being input to the 3G/HD/SD SDI
port.
I
This is used for batch settings. This port is for control use
Service port
and should not normally be used.
s "Batch Setup"
J
HDMI port Inputs video signals from HDMI compatible video
equipment and computers.
K
Insert the supplied cable clamp here to prevent the HDMI
Cable holder
cable from falling out.
L
DVI-D port Inputs the computer DVI-D signals.
M
Connects a LAN cable to the optional HDBaseT
HDBaseT port
Transmitter.
s "Connecting an HDBaseT Transmitter"
s "Optional Accessories"
The projector supports Art-Net. When using Art-Net to
control the projector, set Art-Net to On from the Network
menu.
s Network - Others - Art-Net
Function
p.205
p.138
p.47
p.205
p.135
Name
N
LAN port Connects a LAN cable to connect to a network.
The projector supports Art-Net. When using Art-Net to
control the projector, set Art-Net to On from the Network
menu.
s Network - Others - Art-Net

Control Panel

Name
A
Turns the projector on.
[ ] button
B
[t] button Turns the projector off.
C
Change input buttons Changes to images from each input port.
s "Switching to the Target Image"
17
Function
p.135
Function
p.54