Soft Keyboard Operations; Basic Menu - Epson EB-L1105U User Manual

List of Functions

Soft keyboard operations

The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed. Use
[ ][ ][ ][ ]buttons to move the cursor to the desired key, and then
press the [ ] button to enter the selected character. Enter figures by
holding down the [Num] button on the remote control, and pressing the
numeric buttons. After inputting, press Finish on the keyboard to confirm
your input. Press Cancel on the keyboard to cancel your input.
• Each time the CAPS key is selected and the [
sets and changes between upper case and lower case letters.
• Each time the SYM1/2 key is selected and the [
sets and changes the symbol keys for the section enclosed by the frame.
The following types of character can be entered.
0123456789
Numbers
Letters ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
Symbols

Basic menu

Projector Name
] button is pressed, it
] button is pressed, it
PJLink Password
Remote Pass-
word
Submenu
The projector's name is displayed when using the supplied
application EasyMP Multi PC Projection.
When editing, you can enter up to 16 single-byte alphanumeric
characters. (" * + , / : ; < = > ? [ \ ] ` | and spaces cannot be used.)
Set a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
(Spaces and symbols cannot be used.)
s "About PJLink" p.201
Set a password to use Remote in Epson Web Control. You can
enter up to 8 single-byte alphanumeric characters. (* : and spaces
cannot be used.) The default user name is "EPSONREMOTE"
and the default password is "guest".
s "Changing Settings Using a Web Browser (Epson Web
Control)" p.194
139
Function