5.8 Router Setting
5.8 Router Setting
In order to operate this system, applicable settings for the router must be configured.
Control box
(+ Built-in Media Relay Gateway)
Lobby station
: LAN
: WAN
Port Forward
Configure the following port forwarding settings for the router.
•
NAT - SIP Proxy Server Port No.
•
NAT - Voice (RTP) UDP Port No.
•
HTTPs (WAN) - Port number
•
RTSP for Lobby station
•
RTSP for Network camera
•
HTTPS for Network camera's snapshot
Set the port setting of NAT - SIP Proxy Server to the same setting values as "9.3.1 Control Box
Configuration—[1-1] Configuration—Slot—Site Property—Main" in the PC Programming Manual.
Refer to the setting values of "9.3.1 Control Box Configuration—[1-1] Configuration—Slot—Site Property—
Main" in the PC Programming Manual, and set the following range.
•
Start port: NAT - Voice (RTP) UDP Port No. setting value
•
End port: NAT - Voice (RTP) UDP Port No. setting value + 511
Set the port setting of HTTPS (WAN) to the same setting values as "16.2.2 Network Service—[2-5] Server
Feature—HTTP" in the PC Programming Manual.
DDNS
When using a DDNS service, configure applicable settings for the router.
52
Installation Manual
Switching hub
Room monitor
Door station
Main Site
SIP phone
Network camera
Internet
Router
Smartphone
application
Mobile Internet