Panasonic VL-VN1800 Installation Manual page 31

MNT Port/LAN Port/WAN Port (1000BASE-T)
No.
1
2
3
4
5
1 8
6
7
8
LED Indications
Indication
STATUS
BATT ALARM
SYSTEM MODE
Input (I)/
Signal Name
Output (O)
TRD0 (+) I/O
TRD0 (-) I/O
TRD1 (+) I/O
TRD2 (+) I/O
TRD2 (-) I/O
TRD1 (-) I/O
TRD3 (+) I/O
TRD3 (-) I/O
Colour Description
Green Control Box status indication
•
OFF: Power Off
•
ON: Power On and running
•
Flashing: Starting up/Logging in
Amber Control Box status indication
•
ON: Ready to shutdown
•
Flashing: Shutting down
Red Control Box status indication
•
ON: Alarm
The cause may be one of the following:
–
Power was cut without performing the shutdown procedure.
–
No IP address assigned for the DSP card by the DHCP
server.
•
Flashing: Initialise failed
Red Alarm indication
•
OFF: Normal (During operation, indicates that the voltage of the
lithium battery is normal.)
•
ON: Alarm (During operation, indicates that the lithium battery
needs to be replaced.)
Ready to shutdown (After shutdown, lights when it is safe to
turn off the power.)
Green Primary unit status indication
•
ON: Normal
Amber Primary unit status indication
•
ON: Ready to shutdown
4.2.2 Names and Locations
Function
Transmit and receive data 0 (+)
Transmit and receive data 0 (-)
Transmit and receive data 1 (+)
Transmit and receive data 2 (+)
Transmit and receive data 2 (-)
Transmit and receive data 1 (-)
Transmit and receive data 3 (+)
Transmit and receive data 3 (-)
Installation Manual 31