Panasonic VL-VN1800 Installation Manual page 15

Video intercom system control box
Hide thumbs Also See for VL-VN1800:
Table of Contents

Advertisement

These symbols (①, ②) are only valid in the European Union. If you wish to discard these items, please
contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol
This symbol (②) might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
For users in the United Kingdom
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three-pin mains plug for your safety and convenience. Should the
fuse need to be replaced, please ensure that the replacement fuse is of the same rating and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If
you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement
fuse cover can be purchased from your local Panasonic dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE AC OUTLET IN YOUR PREMISES, THEN
THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS
A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT-OFF PLUG IS INSERTED INTO ANY 13
AMP SOCKET.
WARNING
This appliance must be earthed.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse and fuse
cover.
For users in Germany only
Machine Noise Information Ordinance, 3rd GPSGV: The highest sound pressure level is 70 dB (A) or less
according to EN ISO 7779.
This equipment is not for use at video display work stations according to BildscharbV.
For users in New Zealand only
This equipment shall not be set to make automatic calls to the Telecom '111' Emergency Service.
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted
that the item complies with minimum conditions for connection to its network. It indicates no endorsement
of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance
that any item will work correctly in all respects with another item of Telepermitted equipment of a different
make or model, nor does it imply that any product is compatible with all of Telecom's network services.
or the BSI mark
on the body of the fuse.
1.3 Precautions
Installation Manual
15

Advertisement

Table of Contents
loading

Table of Contents