Panasonic VL-VN1800 Installation Manual page 38

4.5 Starting the Control Box
Installing the Hook Clip for the AC Power Cord
1.
Insert the hook clip into the hook clip hole.
Note
Use only the hook clip included with the Control Box.
Connecting the AC Power Cord
1. Plug the AC power cord into the Control Box and pass the cord through the hook clip as indicated. Push
the hook clip in the direction of the arrow until it clicks.
Note
For safety reasons, do not stretch or pinch the AC power cord.
(1) To AC outlet
2.
Plug the other end of the cord into an AC outlet.
System Initialisation Procedure
All data, except for system prompts, will be erased. Data that is erased includes Unified Messaging data.
The settings for the Control Box will be initialised to their default values.
38 Installation Manual
(1)