Table of Contents
Advertisement
1.
Please provide all system passwords to the customer.
2.
To avoid unauthorised access and possible abuse of the Control Box, keep the passwords secret,
and inform the customer of the importance of the passwords, and the possible dangers if they
become known to others.
3.
The Control Box has default passwords preset. For security, change these passwords the first time
that you programme the Control Box.
4.
Change the passwords periodically.
5.
It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorised access. For a list of numbers and characters that can be used in
system passwords, refer to "1.1.3 Entering Characters" in the PC Programming Manual.
Connecting to Web Maintenance Console
•
When no operations are performed for more than 60 minutes (default), you will be automatically logged
out from Web Maintenance Console and unsaved data will be lost.
1.
Connect the PC to the Control Box:
•
Connect the Control Box to a PC with the MNT port and access the Control Box directly from the PC.
For details, refer to "Direct Connection" in "5.2 PC Connection".
•
Connect the Control Box to a network with the LAN port and access the Control Box from a PC in
your LAN or VPN. For details, refer to "Connection via LAN", "Connection via Virtual Private Network
(VPN) " and "4.4.1 LAN Connection for the Main Unit".
2.
Access Web Maintenance Console:
MNT Port Connection:
Launch your Web browser and in the address bar, enter the following address exactly as shown:
–
223.0.0.1
Note
•
The default subnet mask for the MNT port is 255.255.255.0.
•
If connecting using 223.0.0.1 takes a long time, configure a static IP address for the PC.
LAN or VPN Connection:
Launch your Web browser and input the IP address of the Control Box followed by the Web
Maintenance Console port number into the address bar. The input method will differ according to the
PC's connection to the Control Box.
The default IP address for the LAN port of the Control Box is 192.168.0.31, and the default Web
Maintenance Console port number is 80. Accordingly, the address to enter to connect to the Control Box
for the first time will be as follows (enter the address exactly as shown):
http://192.168.0.31
Note
The default subnet mask for the LAN port is 255.255.240.0.
Note
The IP address and Web Maintenance Console port number for the Control Box can be changed
from their default values. If settings for the LAN port's IP address or port number have been
forgotten, connect using the MNT port connection as described above and confirm the LAN port's IP
address in "16.1 Network Service—[1] IP Address/Ports—Basic Settings", and the port in "16.2.2
Network Service—[2-5] Server Feature—HTTP" in the PC Programming Manual.
5.3 Starting Web Maintenance Console
Installation Manual
45
Advertisement
Table of Contents
Troubleshooting
