Registering Ip Telephones - Panasonic VL-VN1800 Installation Manual

5.6 Registering IP Telephones

The IP address of the SIP phone, the subnet mask address, and the default gateway address can be
assigned to the SIP phone automatically by the DHCP server.
The Control Box's IP address must be assigned manually on the SIP phone side.
For instructions, refer to the documentation of the SIP phone.
Not using a DHCP server (DHCP Server feature or an external DHCP server) when assigning IP
addressing information
All of the IP addressing information must be assigned manually.
For instructions, refer to the documentation of the SIP phone.
Note
•
A SIP phone can only receive IP addressing information from a DHCP server on its own LAN.
Therefore, when SIP phones are located on several LANs, a DHCP server is required on each LAN.
•
When the DHCP client function is enabled for SIP phones, simply connect them to the LAN to use the
DHCP server. For details about the DHCP client function setting, refer to the documentation of the
SIP phone.
5.6 Registering IP Telephones
5.6.1 Registering IP Telephones
After connecting SIP phones to the Control Box over a network, register those IP terminals to the Control
Box manually.
Follow the procedure below for registration.
1.
Do the following settings.
a.
Click Setup → Control Box Configuration → Configuration→ Slot.
b.
Click V-SIPEXT.
c.
Click Port Property.
2.
Set passwords for the SIP extensions.
a.
Click the cell in the Connection column for each SIP extension you wish to register. The Command
Connection screen appears.
b.
Click OUS.
c.
Enter a password in the Password cell for each SIP extension.
d.
Click Apply.
e.
Click the cell in the Connection column for each SIP extension to which a password has been
assigned. The Command Connection screen appears.
f.
Click INS.
g.
Click OK.
Note
•
Alternatively, it is possible to set an extension number as a password for each SIP extension
automatically.
•
In order to set the password automatically, do the following in substitution for step c of the
procedure above.
1.
Click Copy to. A screen will appear with information on assigned extension numbers for SIP
extensions.
50 Installation Manual