Installation Procedure - LevelOne WNC-0302USB User Manual

2 Installation Procedure

Before you proceed with the installation, please read the following chapter!
Note1: For Windows 98SE please make sure your copy of windows is fully updated with the
latest hotfixes by going to
Note2: For Windows XP or Windows XP SP1, please update your windows with the following
http://support.microsoft.com/?scid=kb%3Ben-us%3B822603&x=10&y=13
hotfix
if your copy of Windows XP has been updated with Service Pack 2 (SP2), you do not
need to apply this hotfix.
Note3: The following installation was operated in Windows XP. (Procedures are similar for
Windows 98SE/ME/2000)
Note4: If you have installed the Wireless PC Card driver & utility before, please uninstall the
old version first.
This chapter describes using the LevelOne installer to install the LevelOne USB
wireless network adapter driver.
Installation
Important Note: (For Windows 2K/XP) Please ensure that the USB
adapter is plugged into the computer before starting the installation
program!!! (For Windows 98SE, do not plug in the device before starting
the installation program)!!!
To install the LCU and USB device driver:
1. For Windows 2k/XP insert the USB device into the computer, (for windows
98SE do not insert the device), and insert the installation CD.
2. Open the InstallShield Wizard (setup2k.exe for Windows XP/2000 and
setup98.exe for Windows98SE/Me).
http://windowsupdate.microsoft.com
3