3. Hardware Installation
3.1 Installation Procedure for USB Adapter
You should install the supplied software BEFORE inserting the Wireless USB Adapter when using
Windows 2000, XP or Vista.
Note
The following installation was operated under Windows XP and Vista.
(Procedures are similar for Windows 2000.)
If you have installed the Wireless Adapter driver & utility before, please uninstall
the old version first.
3.2 LED Indicator
The Wireless Adapter has Link and PWR LED.
LED
Status
On
PWR
Off
LINK
On/Flashing
Off
Description
Indicates the power is on.
Indicates the power is off
Indicates the power is on, and the 802.11b/g/n radio is enabled.
Flashing indicates wireless network activity.
Indicates the power is off, or the 802.11b/g/n radio is disabled
6