Table of Contents
Advertisement
3. Hardware Installation
3.1.
Installation Procedure for USB Adapter
You should install the supplied software BEFORE inserting the Wireless USB Adapter when using
Windows 2000, XP or Vista.
Note
The following installation was operated under Windows XP and Vista.
(Procedures are similar for Windows 2000.)
If you have installed the Wireless Adapter driver & utility before, please uninstall
the old version first.
3.2.
LED Indicator
The Wireless Adapter has a single Link/Activity LED.
LED
Status
On
Link/Act
(Blue)
Off
Blinking
3.3.
Check the Installation
The LEDs of the Wireless USB Adapter are clearly visible and the status of the network link can be
seen instantly:
Once the device is plugged to the station's USB port, the Link/Act. LED of the Wireless
USB Adapter will light up indicating a normal status with power.
While the Wireless USB Adapter linked up and transmitting data to the Access Point or to
other Wireless LAN station, the Link/Act. LED will start alternate blinking.
Description
Associated with the network.
Not associated with the network.
Data being transferred.
7
Advertisement
Table of Contents
