LevelOne WNC-0302USB User Manual page 22

To use PEAP-GTC security In the LevelOne Client Utility, access the
Profile Management window.
On the Security tab, choose the WPA radio button.
1.
OR: On the Security tab, choose the 802.1x radio button.
2.
Choose PEAP (EAP-GTC) from the drop-down menu.
3.
Click the Configure
4.
Select the appropriate network certificate authority from the drop-down list.
5.
Specify a user name for inner PEAP tunnel authentication:
6.
Check Use Windows User Name
–
user name.
OR: Enter a PEAP user name in the User Name field to use a separate user
–
name and start the PEAP authentication process.
Choose Token
7.
Note that Token uses a hardware token device or the Secure Computing SofToken
program (version 1.3 or later) to obtain and enter a one-time password during
authentication.
Click Advanced
8.
Leave the server name field blank for the client to accept a certificate from
–
any server with a certificate signed by the authority listed in the Network
Certificate Authority drop-down list. (recommended)
Enter the domain name of the server from which the client will accept a
–
certificate.
The login name used for PEAP tunnel authentication, fills in automatically as PEAP-
9.
xxxxxxxxxxxx, where xxxxxxxxxxxx is the computer's MAC address. Change the
login name if needed.
Click OK.
10.
Enable the profile.
11.
button.
or Static Password, depending on the user database.
and:
to use the Windows user name as the PEAP
20
Security tab in the