LevelOne WNC-0302USB User Manual page 23

Using PEAP-MSCHAP V2 Security
Important Note!
To use PEAP (EAP-MSCHAP V2) security, the server must have WPA-
PEAP certificates, and the server properties must already be set. Check with the IT
manager.
To use PEAP-MSCHAP V2 security In the LevelOne Client Utility, access the
the Profile Management window
On the Security tab, choose the WPA radio button.
1.
OR: On the Security tab, choose the 802.1x radio button.
Choose PEAP (EAP-MSCHAP V2) from the drop-down menu.
2.
Click the Configure
3.
Select the appropriate certificate from the drop-down list.
4.
Specify a user name for inner PEAP tunnel authentication:
5.
Check Use Windows User Name
–
user name.
OR: Enter a PEAP user name in the User Name field to use a separate user
–
name and start the PEAP authentication process.
Click Advanced
6.
Leave the server name field blank for the client to accept a certificate from
–
any server with a certificate signed by the authority listed in the Network
Certificate Authority drop-down list. (recommended)
Enter the domain name of the server from which the client will accept a
–
certificate.
The login name used for PEAP tunnel authentication, fills in automatically as
–
PEAP-xxxxxxxxxxxx, where xxxxxxxxxxxx is the computer's MAC
address. Change the login name if needed.
button.
and:
21
to use the Windows user name as the PEAP
Security tab in