Table of Contents
Advertisement
Click the
Configure
1.
Specify a user name and password:
2.
Select to
Use Temporary User Name and Password
Check
Use Windows User Name
o
user name.
OR: Check
o
login and start the LEAP authentication process.
Select to
Use Saved User Name and Password
Specify the LEAP user name, password, and domain to save and use.
o
Enter the user name and password.
3.
Confirm the password.
4.
Specify a domain name:
5.
Check the
o
the Windows login domain and user name to the RADIUS server. (default)
OR: Enter a specific domain name.
o
If desired, check
6.
wireless adapter to disassociate after logging off.
Enter the LEAP authentication timeout time (between 30 and 500 seconds) to specify
7.
how long LEAP should wait before declaring authentication failed, and sending an
error message. The default is 90 seconds.
Click OK.
8.
Enable the profile.
9.
3.4.2 Using WPA Passphrase Security
To use WPA Passphrase security In the LevelOne Client Utility, access the
the Profile Management window.
1. In the LCU, edit the security settings by clicking New or Modify on the Profile Management
tab.
2. Choose a profile to edit, or name the new profile in the Profile Management window. Enter
the SSID of the access point the client computer connects to.
3. On the Security tab, choose WPA Passphrase.
4. Click on the Security tab, and choose the WPA-PSK radio button. Click the
Configure button.
.
button.
Manually Prompt for LEAP User Name and Password
Include Windows Logon Domain with User Name
No Network Connection Unless User Is Logged In
23
by choosing the radio button:
to use the Windows user name as the LEAP
by choosing the radio button:
to manually
setting to pass
to force the
Security tab
in
Advertisement
Table of Contents
