Disarming; Alarm Function In Arming State - Coban BN-311 User Manual

After tracker enters into the silent arming state, the siren doesn't sound even if an
alarm is triggered, but tracker will send alarm notification to authorized numbers.
6.17.2
Silent arming with remote control (For C model)
Press key in disarm state for 0.5 second, the siren will beep one time, tracker
will enter into silent arming state, the siren doesn't sound even if an alarm is
triggered, but tracker will send alarm notification to authorized numbers.

6.18 Disarming

6.18.1
Disarming by SMS
SMS command: disarm+password
Tracker response: Tracker is deactivated.
Example: disarm123456
After disarming, shock sensor and ACC alarm will be deactivated, and these
alarms won't be triggered any more.
6.18.2
Disarming with remote control (For C model)
Press on for 0.5 second, tracker will enter into disarming state, siren beeps two times, no
SMS message notification.

6.19 Alarm function in arming state

6.19.1
ACC (Ignition / voltage) alarm
Tracker will send "ACC alarm + latitude / longitude" to authorized numbers
every 3 minutes if the ignition of the vehicle has been switched "ON" (Key is
rotated to "ACC ON" position when tracker works in arming state. The siren will
beep for 20 seconds, and if the ignition is still on, then the siren will beep for
another 20 seconds with 20 seconds pause, disarming to quite the alarm.
6.19.2
Acceleration Sensor Alarm
25