Configure Times Of Alarm Sms; Alarms - Coban BN-311 User Manual

SMS command: stop+password
Tracker response: Stop engine succeed
Example: stop123456
Once the immobilize function has been executed, it will remain immobile until you send
command to resume the fuel supply
Remote fuel resume
SMS command: resume+password
Tracker response: Resume engine Succeed
This means tracker will now resume the fuel & power supply.

6.13 Configure times of alarm SMS

The times of the message of a continuous alarm can be configured. 3 times messages by
default.
SMS command: xtime+password+times value
Tracker response: xtime ok!
Example: xtime123456 005 (It means to send messages 5 times.)
Note: The times value must be 3 digits.

6.14 Alarms

6.14.1
Low battery alarm
This feature is activated by default, when the battery is low, tracker will send message "low
battery + latitude & longitude" to authorized numbers for 2 times at 15 minutes interval.
Note: The times of this alert cannot be configured by the xtime command.
SMS command to deactivate: lowbattery+password+space+off
Tracker response: lowbattery off ok
Example: lowbattery123456 off
SMS command to activate: lowbattery+password+space+on
Tracker response: lowbattery on ok
Example: lowbattery123456 on
6.14.2
Power disconnection alarm
This feature activate by default. Tracker will send "Power alarm+latitude & longitude" to
authorized numbers every 3 minutes when external power disconnected
21