Web Management - Planet BSP-360 Quick Installation Manual

Industrial renewable power 5-port gigabit managed switch/router with 4-port 802.3at poe+

Table of Contents

5. Web Management

The following shows how to start up the Web Management of the BSP-360. Note

the BSP-360 is configured through an Ethernet connection. Please make sure the

manager PC must be set to the same IP subnet address.

For example, the default IP address of the BSP-360 is 192.168.0.100, then the

manager PC should be set to 192.168.0.x (where x is a number between 1 and

254, except 100), and the default subnet mask is 255.255.255.0.

IP Address: 192.168.0.x

Logging in to the BSP-360

Step 1. Use Internet Explorer 8.0 or above for Web browser and enter IP address

http://192.168.0.100 (the factory-default IP address) to access the

Web interface.

Step 2. When the following dialog box appears, please enter the default user

name "admin" and password "admin" (or the password you have

changed before).

Default IP Address: 192.168.0.100

Default User Name: admin

Default Password: admin

RJ45/UTP Cable

BSP-360

IP Address: 192.168.0.100

Table of Contents