Table of Contents
Advertisement
L(mm)
W(mm)
Installation Instructions (Continued)
900
520
Under any circumstances, make sure the ceramic cooker hob is well ventilated and the air inlet and outlet
are not blocked. Ensure the ceramic cooker hob is in good work state. As shown below
CLEARANCES
Under any circumstances, make sure the induction cooktop is well ventilated and the air inlet and outlet are not
Note: The safety distance between the hotplate and the cupboard above the hotplate should be
blocked. Ensure the induction cooktop is in good working state as shown below.
at least 760mm.
A(mm)
B(mm)
A:
Refer to rangehood manual*
760
50 mini
B:
50mm minimum
C:
50mm minimum
D:
Air Inlet
E:
Air Outlet (5mm)
*Please refer to your rangehood's user manual for minimum clearances from the top of the cooktop surface
to your rangehood.
WARNING
Ensuring Adequate Ventilation
Make sure the induction cooktop is well ventilated and that air inlet and
outlet are not blocked. In order to avoid accidental touch with the overheating
bottom of the cooktop, or getting unexpected electric shock during working,
it is necessary to put a wooden insert, fixed by screws, at a minimum
distance of 50mm from the bottom of the cooktop. Follow the
requirements on the right.
WARNING
There are ventilation holes around outside of the cooktop. YOU MUST ensure these holes are not blocked by the
worktop when you put the cooktop into position.
Be aware that the glue that join the plastic or wooden material to the furniture, has to resist to temperature not
below 150ºC, to avoid the unstuck of the paneling.
The rear wall, adjacent and surrounding surfaces must therefore be able to withstand an temperature of 90ºC.
H(mm)
D(mm)
55
51
C(mm)
WARNING: Ensuring Adequate Ventilation
20 mini
Make sure the ceramic hob is well ventilated and that air inlet and outlet are not
18
avoid accidental touch with the overheating bottom of the hob, or getting unexp
during working, it is necessary to put a wooden insert, fixed by screws, at a minim
from the bottom of the hob. Follow the requirements below.
There are ventilation holes around outside of the hob. YOU MUST ensure these h
the worktop when you put the hob into position.
16
Be aware that the glue that join the plastic or wooden material to the fu
temperature not below 150°C, to avoid the unstuck of the paneling.
The rear wall, adjacent and surrounding surfaces must therefore be
A(mm)
B(mm)
X(mm)
875+4
495+4
50 mini
+1
+1
A
D
E
Air intake
Air exit 5mm
SEAL
F(mm)
3 mini
wall
Advertisement
Table of Contents
