Table of Contents
Advertisement
INSTALLATION
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant and insulated work surface
material (Wood and similar fibrous or hygroscopic material shall not be used as work surface material unless
impregnated) to avoid the electrical shock and larger deformation caused by the heat radiation from the hotplate.
As shown below:
A:
268+4mm
B:
500+4mm
C:
50mm minimum
D:
50mm minimum
E:
50mm minimum
F:
50mm minimum
G:
3mm minimum
Note: The safety distance between the sides of the cooktop and the inner surfaces of the worktop
should be at least 3mm.
15
Advertisement
Table of Contents
