Operation Instructions (Continued)
LOCKING THE CONTROLS
•
You can lock the controls to prevent unintended
use (for example children accidentally turning the
cooking zones on).
•
When the controls are locked, all the controls except
the ON/OFF control are disabled.
To lock the controls
•
Touch the lock symbol. The timer indicator
will show "Lo".
To unlock the controls
•
Make sure the induction cooktop is turned on.
•
Touch and hold the lock symbol for a few seconds.
•
The cooktop will unlock and you can now start using
your induction cooktop.
WARNING!
When the cooktop is in the lock mode,
all the controls are disable except the ON/OFF, you can
always turn the induction cooktop off with the ON/
OFF control in an emergency, but you shall unlock the
cooktop first in the next operation.
AUTOMATIC SHUT-OFF
Your induction cooktop features a safety feature for
automatic power-off occurring whenever you forget to
switch off a cooking zone.
The default shutdown times are shown in the
table below:
USING THE TIMER
You can use the timer in two different ways:
•
You can use it as a minute minder. In this case, the
timer will not turn any cooking zone off when the set
time is up.
•
You can set it to turn one or more cooking zones off
after the set time is up.
Note: You can set the timer up to 99 minutes.
Using the timer as a minute minder timer.
If you are not selecting any cooking zone:
•
Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're
not selecting any cooking zone.
•
Touch the timer control. "10" will show in the timer
display and the "0" flashes
•
Set the time by touching the "-" or "+" control
of the timer
Hint: Touch the "-" or "+" control of the timer to
decrease or increase by 1 minute once.
Touch and hold the "-" or "+" control of the timer to
decrease or increase by 10 minutes.
•
Touching "-" and "+" together, will cancel the timer,
and the "00" will show in the minute display.
•
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
•
The buzzer will beep for 30 seconds and the timer
indicator shows "- -" when the setting time finished.
Setting a timer for an individual zone
•
Touch the heating zone selection control that you
want to set the timer for.
•
Touch timer control, the minder indicator will start
flashing and "10" will show in the timer display.
•
Set the time by touching the "-" or "+" control of
the timer
Hint: Touch the "-" or "+" control of the timer
once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer
will decrease or increase by 10 minutes.
•
Touching "-" and "+" together, will cancel the timer,
and the "00" will show in the minute display.
•
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator will
illuminate indicating that zone is selected.
•
When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
12