Electronic Programmer; Symbols Description - CDA DC730 Series Manual For Installation, Use And Maintenance

12

Electronic Programmer

The electronic programmer is a device that groups together the following
functions:
– 24 hour clock with illuminated display
– Timer (up to 23 hours and 59 minutes)
– Programme for automatic oven cooking
– Programme for semi-automatic oven cooking.
Description of the Buttons:
Symbols Description
Timer
Cooking time
End of cooking time
simultaneously: Switching to
manual and program reset.
To increase the numbers on the
digital display
To decrease the numbers on the
digital display.
Note:
Select a function by the respective button and, in 5 seconds, set the required time with the
("one-hand" operation).
After a power cut the display resets to zero and cancels the set programs.
Caution: If the electricity supply is cut off (the display numbers will flash), the clock will reset
and all the programs entered will be cancelled.
(Lower Main Oven only)
Description of the Illuminated Symbols:
Symbols
A
flashing
A
always lit
A
flashing
Description
Programmer in automatic
position but not programmed.
Programmer in automatic
position with program set.
Automatic cooking taking place.
Timer in operation
Program error.
and
(The time of day lies between the
calculated cooking start and end
time).
A
Fig. 6
/ buttons