Semi - Automatic Cooking - CDA DC730 Series Manual For Installation, Use And Maintenance

Semi - Automatic Cooking

This automatically switches the oven off after the required cooking time. There are two methods of semi-
automatic cooking:
1. METHOD: Programming the cooking time (Fig. 11)
– Set the cooking time by pressing button
if you have gone beyond the required time.
The letter A and the symbol
2. METHOD: Programming the end of cooking time (Fig. 12)
– Set the cooking time by pressing button
if you have gone beyond the required time.
The letter A and the symbol
Having programmed according to one of the above methods, set the temperature and function via the
function selector and thermostat knob (see specific chapters).
The oven will come on immediately and when the set time or programmed end of cooking time expires,
it will automatically switch off.
During cooking the letter A and the symbol
time until end of cooking or press button
The cooking program can be cancelled at any time by pressing the two buttons
At the end of cooking, turn the oven knob to the off position the
The letter A will flash and the acoustic signal will come on - this can be switched off by pressing any of
the buttons.
Reset the function selector and thermostat knob and set the programmer to manual by pressing the two
buttons simultaneously.
Important: Also if oven is turned off automatically by the programmer, remember to turn to the
off position the function selector and the thermostat knob. If not, when pressing two buttons
simultaneously for manual use, the oven will start to operate.
Remember to press the two buttons
Fig. 11
and then button
will appear.
and then button
will appear.
remains on; press button
to display the end of cooking time.
simultaneously to be able to use the oven in manual setting.
A
to move forward or to move back
to move forward or to move back
to display the remaining
simultaneously.
symbol will go out.
A
Fig. 12
15