Table of Contents
Advertisement
Electronic programmer/timer
This oven's electronic timer is equipped with touch control sensors.
Each registered touch of a sensor field is confirmed by a single beep.
It is advisable to keep the sensor fields clean at all times to avoid
errors in operation.
Setting the current time
After connection to the mains supply, or re-connection after a power
outage, the display will show '24hr'. Use the adjustment knob (G in Fig.
1) to change between 24 hour time display and 12 hour time display.
•
Press the clock sensor
number of hours.
•
Press the clock sensor
knob (G) to set the time in minutes. Press the clock sensor
again to confirm entry.
Please note: The time must be set for the oven to work.
Setting the minute minder function
The minute minder function can be set at any time whilst a function is
active. The minute minder can be set anywhere from 1 minute to 23
hours and 59 minutes.
•
Press the timer symbol
flash and the time display should show '00:00'.
•
Set the desired duration of the minute minder using the adjustment
knob (G). Touch the timer symbol
be set. The
shown on the timer display.
10
. Use the adjustment knob (G) to set the
again. Use the temperature control
. The
symbol will be solidly lit. The current time will be
symbol on the display should
and the minute minder will
Hide quick links:
Advertisement
Table of Contents
