Technical Data; General Characteristic Features - BFI Automation CFC 2000L Original Operating Instructions

Compact flame controller

Table of Contents

Technical data

3.1

 Flame scanner with integrated amplifier and flame re-

lay

 Tested by the German Technical Inspection Associa-

tion TÜV, approved by IECEx

 For continuous, intermittent and 72-hours operation

 Type UV, UV1:

 Type IR (VIS-IR): For monitoring oil, coal and mixed-

 Type IR2 (IR):

 Type IR3 (IR):

 Two-channel flame monitoring system

 Sensitivity adjustable separately for both channels by

software

 Analog output flame intensity 0(4) to 20 mA

 Flame analysis possibility by software

 LED status display for flame relay and flame intensity

 No additional wiring to external flame amplifiers

 Type of protection IP66

 Suitable for safety related applocations up to SIL 3 (ac-

cording to IEC 61508)

Technical data

For monitoring gas and oil-fired burn-

ers in the UV range

fuel burners

For monitoring gas and oil-fired burn-

ers in the IR range

For flames of all kinds (including resi-

dues, H

S and special gases)

3-1

Table of Contents

Do you have a question about the CFC 2000L and is the answer not in the manual?