Download Print this page

Installation - ETC ColorSource CYC Installation Manual

Hide thumbs Also See for ColorSource CYC:

Advertisement

ETC Installation Guide
ColorSource CYC v1.7/v3.1
The luminaire must be installed at
least 0.1 m (4.0 in) away from all
lighted objects.
Do not mount the fixture on or
near a flammable surface.
Do not stare at the operating light
source.
This product should not be
discarded as unsorted waste but
must be sent to separate collection
facilities for recovery and recycling.
Protective earth (ground)

Installation

Mounting
The ColorSource CYC is
designed for floor
mounting. You can also use
the yoke accessory
(included) for top-hang
pipe mounting with a
clamp. Use the included
yoke locking knobs and
washers (see image at right)
to attach the yoke accessory
to the fixture. Tilt the fixture
so that the base of the
fixture is perpendicular to
the cyclorama. See
the Tilt on page 5
Safety Cable
The safety cable (or other approved safety device) must be attached to
the fixture when it is mounted using the optional yoke and C-clamp
(see image above).
ColorSource CYC
Adjust
.
Page 3 of 12
Le luminaire doit être installé à au
moins 0,1 m (4,0 po) de tout objet
éclairé.
Ne pas installer le projecteur sur ou
à côté d'une surface inflammable.
Ne pas regarder la source de lumière
lorsqu'elle fonctionne.
Ce produit ne doit pas être jeté avec
les déchets ménagers mais doit être
déposé dans une collecte de déchets
électroniques ou dans un point de
collecte.
Protection Classe I Mise à la terre
Safety cable
anchor point
Yoke
locking
knob
Washer
ETC

Advertisement

loading