Epson Part Feeding 7.0 IF-240 Manual page 62

5. Maintenance and Component Replacement
Step 4
Unscrew and open the support (1).
4 screws, X0
Unscrew the actuator (2).
1 screw, Tx8
Swap out the actuator (C).
Step 5
Screw back the actuator in the support (1).
1 screw, Tx8, - 0.8Nm
Close and screw support (2).
4 screws, X0, - 0.6Nm
56 Part Feeding 7.0 IF-240 Rev.7