Recommended Camera Settings - Boxfish 360 Owner's Manual

3. The O-ring groove should be cleaned to ensure it is free from any salt deposit
or foreign material; lightly coat the O-ring with the provided lubricant before
reinstalling it in the groove.
4. A damaged O-ring should be discarded immediately and replaced only with
one that is provided by Boxfish Research.
5. Replace the tow main O-rings and three dome O-rings annually.
6. It is recommended that you ship the camera to the factory or our distributor for
a complete overhaul every year or after every 200 dives.

Recommended Camera Settings

Below are Boxfish Research's recommended settings for the included Z-Cam E1
cameras. The cameras ship pre-configured with these settings.
Video mode settings
•
Usage:
o
§
§
§
§
Setup Menu (1st from bottom):
o
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
Image Menu (2nd from bottom):
o
§
§
§
§
§
§
All rights reserved. Information and specifications may change at any time without notice.
Version 1.8.0, 2018-01-18
Press Fn button to enter main menu
Press smaller buttons below to navigate
Press Fn button to select
Press Menu button to cancel
Wi-Fi: Off
Wi-Fi mode: AP
Bluetooth: Advertising Off
File numbering: Auto reset
LCD brightness: 2
Flicker reduction: Auto
Grid display: Off
LED: On
Electronic level: Off
HDMI OSD: Off
HDMI format: Auto
Liveview audio: Off
Beep: On
Fn button: Setting
Power button: Mode
Video system: NTSC (or PAL)
CVBS output: Off
Auto power off: Manual
Auto off panel: Manual
Usb device: Mass storage
Version: 0.29
White balance: Auto
Tint: 0 (only available when White balance set to manual)
Metering mode: Center
Brightness: 50
Sharpness: Normal
Saturation: 25
26