Boxfish 360 Owner's Manual page 20

3. Select the appropriate port for the camera device. The port name depends on
your operating system. For most users there should be only one option to
choose from, this being the Boxfish 360 camera.
4. If the list is empty, make sure the Boxifsh 360 is connected and turned on,
and then press "Refresh Devices"
5. Choose the target directory. If the folder doesn't exist it will be created.
6. You can specify a project name that will be added to every copied file name.
This can make it easier to organise your files later.
7. Press "Copy Data"
8. The App will copy the log data, creating a new file per recording.
9. It takes about 30 seconds to copy 500 datasets.
10. You can open the CSV files in Excel, Numbers, Calc, or a text editor.
Sample data files:
Erase Memory:
After downloading the data you may press "Erase memory" to free up log space for
future data. The memory can hold up to 32 thousand log entries, which is roughly 12
hours of recording at one entry per second.
All rights reserved. Information and specifications may change at any time without notice.
Version 1.8.0, 2018-01-18
20