Adjusting The Exposure Compensation Value (Ev); Adjusting The Iso Value; Adjusting The Shutter Angle - Boxfish 360 Owner's Manual

8. Press Fn button to confirm.
9. Press Menu button to exit.
10. Press Menu button again to enter the shooting menu.
11. Press smaller buttons above to navigate to the White Balance setting.
12. Press Fn button to select.
13. Press smaller buttons below to change the value to the desired colour
temperature.
14. Press Fn button to confirm.
15. Press Menu button to exit.

Adjusting the exposure compensation value (EV)

1. We recommend to shoot with EV of -1. Because of the wide range of
exposures present on the 185 degree lenses this generally produces the best
results.
2. In some occasions it might be beneficial to use a lower EV value, for example
when it's important to preserve detail in the brightest area, like surface ripples.
3. Press Menu button to enter the shooting menu.
4. Press smaller buttons above to navigate to the EV setting.
5. Press Fn button to select.
6. Press smaller buttons below to change the value to the desired value.
7. Press Fn button to confirm.
8. Press Menu button to exit.

Adjusting the ISO value

1. We recommend to shoot with Auto ISO. Because of changing lighting
conditions during the dive this generally produces the best results.
2. Because exposure compensation relies on adjusting ISO sensitivity, a fixed
ISO value disables automatic exposure compensation.
3. For best noise control we recommend a maximum ISO value of 1600.
4. Press Menu button to enter the shooting menu.
5. Press smaller buttons above to navigate to the ISO setting.
6. Press Fn button to select.
7. Press smaller buttons below to change the value to the desired value.
8. Press Fn button to confirm.
9. Press Menu button to exit.

Adjusting the shutter angle

We recommend to shoot with Auto Shutter Angle. Because of changing
•
lighting conditions during the dive this generally produces the best results.
Press Menu button to enter the shooting menu.
•
Press smaller buttons above to navigate to the Shutter Angle setting.
•
Press Fn button to select.
•
Press smaller buttons below to change the value to the desired value.
•
Press Fn button to confirm.
•
Press Menu button to exit.
•
All rights reserved. Information and specifications may change at any time without notice.
Version 1.8.0, 2018-01-18
24