Erasing Memory Cards; Preparing New Memory Cards - Boxfish 360 Owner's Manual

Erasing memory cards

1. Remove the top lid.
2. Open the top compartment of each camera.
3. Remove the three memory cards, using the supplied grabber if necessary.
4. Insert the memory cards into the supplied card reader.
5. Connect the card reader to your computer.
6. Start the Boxfish App for Windows or Mac.
7. Click "Erase Cards".
8. The Boxfish App will erase the cards and write camera id and configuration
files.
9. The configuration file (MISC/cfg) on each card is required or the synchronised
autostart will not work.

Preparing new memory cards

1. Connect the card reader to your computer.
2. Insert the first memory card into the supplied card reader.
3. Format the card as exFAT and name it 360_01.
4. If the card is not formatted using exFAT file system, the video files are split at
5 minute intervals to work around the maximum file size.
5. Insert the second memory card into the supplied card reader.
6. Format the card as exFAT and name it 360_02.
7. Insert the third memory card into the supplied card reader.
8. Format the card as exFAT and name it 360_03.
9. Start the Boxfish App for Windows or Mac.
10. Click "Erase Cards"
11. The Boxfish App will erase the cards and write the camera configuration file.
12. The configuration file is required or the synchronised autostart will not work.
All rights reserved. Information and specifications may change at any time without notice.
Version 1.8.0, 2018-01-18
18