Charging - Boxfish 360 Owner's Manual

1. After verifying that the main O-ring is in good condition, lightly coat it with the
lubricant provided.
2. Make sure the O-ring groove located in the top part of the housing is free from
any foreign material; the groove can be cleaned with the aid of a microfiber
cloth.
3. Place the main O-ring into the groove by gently pushing it, first at the corners,
then the whole perimeter.

Charging

1. You can use the camera while power is supplied from a wall outlet (wall
socket) by using the AC Adaptor (supplied).
2. Insert the battery packs into the cameras.
3. Connect the camera charge port to a wall outlet (wall socket) using the AC
Adaptor (supplied).
4. The red charge indicators on each camera and the camera mounting plate is
turned on during charging.
5. The red charge indicators will turn off once the charging has completed
without any problem. (Disconnect the charger from the electrical socket and
detach the battery after charging is completed.)
6. Charging time: 120 minutes
The indicated charging time is for when the battery has been discharged
completely. The charging time may vary depending on how the battery has
been used. The charging time for the battery in hot/cold environments or a
battery that has not been used for a long time may be longer than normal.
All rights reserved. Information and specifications may change at any time without notice.
Version 1.8.0, 2018-01-18
12