Quick Start Guide; Opening And Closing The Housing; Preparation Of The Housing - Boxfish 360 Owner's Manual

Quick start guide

1. Open the housing by removing the top lid.
2. Turn on each camera with it's power button.
1. To record video: nothing else needs to be done.
2. To record timelapse: tap each camera's power button again to switch
them into photo mode.
3. Close the housing, ensure the O-ring is free from dirt and not pinched.
4. Recording:
1. To record video, briefly but firmly press the outside button to start or
stop the recording.
2. To record timelapse photos, briefly but firmly press the outside button
twice to start the recording. Hold the button for 5 seconds to stop the
records. You can adjust the timelapse interval with the Boxfish App.
5. The view from the three lenses overlap a short distance outside the housing in
all directions.
6. The cameras capture circular fisheye 4K-UHD video or JPG+DNG RAW still
images.
7. After recording, open the housing and turn off the cameras.
8. Retrieve files from the three Micro SD cards using the supplied reader and
App for Windows and Mac.
9. The App automatically organises the files by take and creates project files for
Kolor Autopano Video Pro.
10. Open the project file in Kolor Autopano Video Pro and render the desired part
of the timeline.
11. Erase the Micro SD cards using the supplied App. This guarantees that the
required camera configuration files are written to the cards.
12. Connect the supplied AC adapter to charge the cameras inside the housing.

Opening and closing the housing

1. Always place the housing on a flat surface or in your lap and open it with the
top facing up.
2. When closing, make sure the O-ring is free of dirt and there is nothing caught
between the top lid and the main housing.
3. The housing can be opened and closed by operating the three housing locks;
when opening, depress the safety catch, then flip the latch up.
4. To close, position the lid safely on the housing, making sure not to pinch the
O-ring. Then place the latches over the catch, then press the latch down until
flat with the housing, and then make sure they are locked in place securely.

Preparation of the housing

All rights reserved. Information and specifications may change at any time without notice.
Version 1.8.0, 2018-01-18
11