Section 4: Applications; Overview; Municipal Box (Auxiliary) - Honeywell XLS140 Installation Manual

4.1 Overview

Chapter
Section 4.2 "NFPA 72-1999
Central or Remote Station Fire
Alarm System (Protected
Premises Unit)"
Section 4.3 "NFPA 72-1999
Proprietary Fire Alarm Systems"
Section 4.4 "Fire/Security
Applications"
Section 4.5 "Releasing
Applications"

Municipal Box (Auxiliary)

Municipal Box applications require a TM-4 Transmitter module. Refer to the Transmitter Module
TM-4 installation document for installation details.
XLS140 Installation Manual Form Number 95-7673-3 P/N 51927:C 12/06/2005

Section 4: Applications

Covers the following topics
How to install UDACT with the control panel for use as a NFPA
Central or Remote Station Fire Alarm System (Protected
Premises Unit)
How to set up a Protected Premises Unit to communicate with a
listed compatible Protected Premises Receiving Unit.
How to use the control panel as a combination Fire/Security
system, including the following:
• Installing a Security Tamper Switch into the cabinet
• Circuit Wiring
How to install the following releasing applications:
• Releasing Device to the Control Panel (NAC integral circuits)
• Releasing Device to the XLS-CM-N/TC810N1013 Module
• NBG-12LRA Agent Release-Abort Station
59