Table of Contents
Advertisement
Appendix D: Canadian Applications
D.1 Standalone Application
D.1.1 XLS140 with KDM-2
If using KDM-2 as the primary display for XLS140, an ACS series annunciator must be mounted
adjacent to the panel or within XLS140 enclosure.
D.1.2 XLS140 with XLS-NCA
Network Control Annunciator (XLS-NCA) with 640-character, multi-line display complies with
ULC requirements when used as the primary display for XLS140.
D.2 Local Network Application
To meet ULC requirements, the network's Manual Controls may only be operated from one
location at any given time. When panels are networked (using NCM Network Control Modules),
employ AKS-1B Key Switch on each panel's Primary Annunciator to enable its functions.
XLS-NCA may be a Primary Annunciator when AKS-1B is installed. Refer to the XLS-NCA
Manual for more information.
An XLS-NCA may be employed as a Display and Control Center. In the event that communication
fails between the panels and the Control Center, the panels will continue to function in local/
standalone mode.
D.3 Automatic Alarm Signal Silence
If selecting this feature for a system requiring annunciators, consult the Authority Having
Jurisdiction.
D.4 Annunciator Applications
1.
In Canada, the ACM series annunciator modules must be used to annunciate the fire alarm
input points/zones only, if no multi-line sequential display is installed.
2.
For Canadian applications, the following LED colors must be employed:
– Red must be used to indicate active alarm inputs.
– Yellow must be used to indicate supervisory, burglary or trouble signals.
– Green must be used to indicate the presence of power or an activated output.
D.5 Releasing Devices
Supervision for shorts is required; use REL devices and type code R
(With on-board NACs, use REL-2.2K; with XLS-CM-N/TC810N1013 modules use REL-47K.
Refer to Section 4.5 "Releasing Applications" for details.
XLS140 Installation Manual Form Number 95-7673-3 P/N 51927:C 12/06/2005
C
ULC.
EL
KT
83
Hide quick links:
Advertisement
Table of Contents
