Replacing The Reverse (Separation) Roller - Xerox FD70 User Manual

®
Maintenance Xerox FD70 Scanner
If there is any residue on the glass that does not remove with a soft dry cloth try dampening the
cloth with Isopropyl rubbing alcohol.

Replacing the Reverse (Separation) Roller

The roller will wear out and is designed to be a user-replaceable part. A worn roller can cause
documents to feed in skewed at an angle, or multiple pages to feed at the same time. Before
replacing the roller you should clean it as excessive dust on the roller will make it appear worn and
smooth. You cannot properly diagnose a worn roller until you have cleaned it. You should generally
replace the roller between 80,000 and 100,000 scans.
Replacement parts can be purchased from the Supplies & Accessories page for your scanner at
www.xeroxscanners.com.
1. Open the scanner.
Scanner User Guide 39