Clearing Paper Jams; Cleaning The Scanner; Cleaning The Outside Of The Scanner; Cleaning The Lcd Touch Screen - Xerox FD70 User Manual

Maintenance

Clearing Paper Jams

If your scanner stops scanning due to a paper jam in the Automatic Document Feeder, a warning
opens after a few moments.
1. Open the Automatic Document Feeder cover.
Do not attempt to remove a jammed page with the scanner closed.
2. Remove the jammed paper and close the cover.
To reduce the number of paper jams, smooth and straighten the paper before scanning, adjust
the guides to the paper size, and insert the paper evenly into the ADF.

Cleaning the Scanner

Regular maintenance of your scanner can help to ensure continual optimal performance.
Using a soft, lint-free cloth, wipe down all plastic surfaces on the scanner.

CLEANING THE OUTSIDE OF THE SCANNER

Excessive dust accumulation around and on the scanner will pull into the scanner during the
scanning process and clog the ventilation openings. You should clean the outside of the scanner
at least once a month to help limit the amount of dust build up in the scanner.
1. Turn off the scanner power.
2. Using a soft dusting cloth, wipe down the body of the scanner, input tray and exit area. Make
sure that the input and exit slots in the scanner are also clean.
3. When you're finished, press the power button to turn the scanner back on.

CLEANING THE LCD TOUCH SCREEN

Wipe the Touch screen with a wet cloth first then wipe it with a dry cloth.
Scanner User Guide
®
Xerox FD70 Scanner
35