Autonomous SmartDesk Core Duo Assembly Instructions page 3

9a. Find the pre-drilled holes on the edge of each Desk Top (G) as shown, then attach Control
Switches (H) using 2 x (Y1) Screws.
9b. Attach Control Box (F) beneath Desk Top using 2 (Y), Repeat process
with the Desk on the other side. Or you can place each Control Box (F)
onto the corresponding Cable Tray (L).
10. Plug each Control Box (F) into its corresponding Power Tray (C) outlet.
Then plug the Power Tray (C) cord into your power outlet.