Daikin Altherma 3 H HT F Installer's Reference Manual page 221

Forced defrost
Overview field settings
Export MMI settings
EPRA14~18D + ETVH16SU18+23E
Daikin Altherma 3 H HT F
4P644738-1A – 2022.03
# Code
[9.G] N/A
Forced defrost
Manually start a defrost operation.
# Code
[9.H] N/A
NOTICE
Forced defrost start-up. You can only start forced defrost when the heating
operation has been running for a while.
Almost all settings can be done using the menu structure. If for any reason it is
required to change a setting using the overview settings, then the overview
settings can be accessed in the field settings overview [9.I]. See
4
overview setting" [ 139].
About exporting the configuration settings
Export the configuration settings of the unit to a USB memory stick, via the MMI
(the user interface of the indoor unit). When troubleshooting, these settings can
be provided to our Service department.
# Code
[9.N] N/A
To export MMI settings
1 Open the user interface panel and insert a USB memory stick.
Description
Disable protections:
▪ 0: No
▪ 1: Yes
Description
Do you want to start a defrost operation?
▪ Back
▪ OK
Description
Your MMI settings will be exported
to the connected storage device:
▪ Back
▪ OK
10 Configuration
|
"To modify an
—
Installer reference guide
221