Advertisement
Step 3:
Orient and Align the Bottom Plate (8) in-line
with the bottom side mounting holes of the
Head Light Guard (4), as shown.
Slip-in the Screw M5x10 (7) – 2off, Washer M5
(6) – 2off, and the Rubber Spacer (5) – 1off, in
positions as shown and secure the threads.
The Rubber Spacer (5) 1 off is to be fitted to the
Bottom Plate (8), as shown and it must rest on
the inside surface of the head lamp, and
dampening the Head Light Guard assembly
against any kind of vibrations, during riding.
Copyright By SRC
Design and Specification are subjected to change
Bracket RH & Bracket LH is shown
in "As is mounted condition"
Page 4
Advertisement
