Page 1
Use Liquid Thread Locker Washer M6 Washer M5 SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3
The Pin has threaded shank which can be screwed on to the Bracket. Step 3: Repeat the Step 2 for mounting the Bracket RH (4), as shown. Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4
Guard and holding on to the Mounting Pins, projecting out of the Bracket RH & Bracket LH The Final Mounted condition of Head Light Guard is shown in the drawing. Copyright By SRC Design and Specification are subjected to change Page 4...
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.