Page 1
Applicable to Finished colour versions of Silver and Black Installation / Parts List / Bill of Material for Mounting The scope of supply from SRC for the above, will be the Aluminium Fabricated Engine Guard, as shown below and the 4 Hexagon Nuts, for mounting.
Mounting Instruction Step 1: The Dirt shield which is mounted to the Underside of the Engine, has to be removed first, for fitment of SRC Engine Guard The drawing above shows, the condition, when the Dirt Shield is removed. It exposes the Mounting screws, already provisioned in the Engine, for mounting the Dirt Shield.
Page 4
The Hexagon Nuts when secured and tightened to the Projecting screws, gets flushed inside and does not project outside. Tighten to a torque of 24-26 N-m Final Mounted condition of the Engine Guard is as shown. Copyright By SRC Design and Specification are subjected to change Page 4...
Page 5
Accessory part to the Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.