3.4.7.1
De vice Detecting Configuration
Op tions Summary
A ction
Select action that robot should do.
So ft or hard reset
Select reset type robot should send on each boot.
R etry-Count
Fill retry counter here. Robot will reset system at most counter times, and then let
system continue its POST.
A t time
Select robot action time:
After show logo – Robot will do action after logo is displayed. System devices are
almost ready.
Before show logo – Robot will do action earlier before logo, but some devices may
not be ready.
Chapter 3 – AMI BIOS Setup
Action: Rest System
Reset System
Hold System
Soft
Hard
3
After show logo
Before show logo
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
69