Aaeon GENE-TGU6 User Manual page 82

Op tions Summary
OS Timer (minute)
Timer count set to Watch Dog Timer for OS loading.
Delayed POST (PEI phase)
Enabled - Robot holds BIOS from starting POST, right after power on. This allows
BIOS POST to start with stable power or start after system is physically warmed -up.
N o te: Robot does this before 'Sends watch dog'.
Delayed time (second)
Period of time for Robot to hold BIOS from POST.
Delayed POST (DXE
p hase)
Enabled - Robot holds BIOS before POST completion. This allows BIOS POST to
start with stable power or start after system is physically warmed -up.
N o te: Robot does this after 'Sends watch dog before BIOS POST'.
Delayed time (second)
Period of time for Robot to hold BIOS from POST.
R eset system once
Enabled - Robot resets system for one time on each boot. This will send a soft or
hard reset to onboard devices, thus puts devices to more stable state.
So ft or hard reset
Select reset type robot should send on each boot.
Chapter 3 – AMI BIOS Setup
3
Disabled
Enabled
10
Disabled
Enabled
10
Disabled
Enabled
Soft reset
Hard reset
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
68